1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 314Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 314

Installation

1Place trimtilt unit into positionApply OMC Triple-Guard grease to the lower pin, and install the pin
i ftIbs(68-73 Nm), then loosen one nut by Va to 14 turnring faCing out
'" 2If loosened, tighten the tilt tube nut to torque of 50-54

f2l 3: Instal.1 external snap rings on lower pin with sharp edge of
4Extend tilt cylinder rod to match with holes in swivel bracket5Apply OMC Triple-Guard grease to upper pin, and install the

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285