1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 311Get this manual
o o22924
126116With cylinder body in vise, unscrew trim cylinder end caps using OMC Universal Spanner Wrench, PIN 912084,
and breaker barYou will have to use smaller pins in spanner wrenchRemove both trim pistons, rods, and end caps
27 117Inspect both bores oftrim cylinders for excessive scoring28 118Remove back-up rings and a-ring from each trim piston129119Using OMC Rod Holder, PIN 983213, clamp rod tightly in
a viseRemove wear plate from trim rod and remove end capRemove from viseaUsing screwdriver, carefully pry the scraper out of the end cap and discard