1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 299Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 299

'sl5Connect 12-volt source to the relay "s" terminalsUse an ohmmeter calibrated on high ohms scale or continuity light to test for continuity on relay terminals "B+" and "M" The meter must show continuity1sl6Leave the 12-volt source connected to the "s" terminalsConnect meter leads to relay terminals "B-" and "M" The meter must show no continuity7If your results vary, replace the relay ( 12V)

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285