1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 261Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 261

3 C02072

Key Switch 1Install the stop switch clip and lanyard2Use an ohmmeter calibrated on appropriate scale or continuity light to test continuity3Turn the key to the OFF position
] 4Connect meter as shown Meter must show continuity5Turn the key to the ON position Meter must show no continuity6With meter connected as shown, push key in while in the ON and START positions Meter must show continuity Meter must show no continuity when key is released7Place the control handle in NEUTRAL position

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285