1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 214Get this manual
Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing rv 2Remove four bearing housing retaining screws, and remove bearing housing assembly from jet housingi safety glasses and proceed with care to avoid
unsnapping the ring from the pliers4Remove O-rings from housing and discardrJl 5Warm bearing housing with propane torch to aid in removal of upper seal carrierDo not apply too much heat as seals or carrier may be damaged
3Remove retaining ring with retaining ring pliersWear
6Allow bearing housing to cool until it is warm to the
[";1 7Place bearing housing assembly in pressPress from the