1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 198Get this manual
on side of
23The forward gear bearing and bearing housing are serviced as
an assemblyIf either is worn or damaged, replace the entire assembly24Remove the pinion bearing only if it needs to be replaced
Before attempting removal:
V4Remove bearing retaining screw
gearcase V6Remove bearing retaining ring on top of the
pinion bearingIf the pinion bearing must be replaced, assemble as shown from OMC Universal Pinion Bearing Remover and Installer, PIN 391257: 26 V4114-20 12 inHex Head Screw in0.0Flat Washer PIN 326582 Rod PIN 391260 Plate PIN 326574 Remover 114-20 1114 inHex Head Screw Position the tool in the gearcaseUsing mallet, drive the bearing from the gearcase27 V6 PIN PIN PIN PIN