1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 190Get this manual
3Place the seal ring Q) in groove in the impeller housing 4Lightly coat the exterior of the impeller cup with OMC Gasket Sealing CompoundInstall the cup in the impeller housing
the water tube grommet
facing up
with the inside taper
6Install the impeller housing cover (0
f81 7Apply OMC Adhesive sealant to flat side of the impeller
housing grommet Install the grommet, flat side down
l!J rotation, install the impeller into the liner with slot for impeller
cam facing out
Lightly coat the liner with oilWith counterclockwise
Run thin bead of OMC Adhesive sealant in the seal groove, and install the special shaped a-ring seal
Installation
[:;l 1Apply OMC Gasket Sealing Compound to both sides of a