1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 181Get this manual
9 COA2674 26645
4Remove the helix halves
roller Q), and guides
[!] 5Pull the throttle pin out of the cable 6Remove the stop switch cover7Remove the tie straps from large braided tube and pull stop switch wires in small braided tube through
1111 8Remove the throttle cable retainer clip Pry the throttle
cable trunnion out of the steering handle and remove the cable9Remove the throttle friction control10Remove the warning horn assembly from the handlef13l 11Using punch and mallet, drive the steel pin that retains the inner handle from the steering handle""''_ _