1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 180Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 180

Twist-Grip TM Throttle Servicing85 TTL Removal """ 1To avoid accidental starting of engine while servicing, twist and remove all spark plug leadsf1l 2Remove the pivot connectorthrottle cable bracketand jam nut from the throttle cable1zl 3Remove the stop button ground lead from the powerhead and disconnect the 1-pin Amphenol connector4Using OMC Pin Removal Tool, PIN 322698, remove the wire from the plug
5Disconnect the 3-pin Amphenol connectorf41 6Remove cable retainer screws warning horn cable
and retainerRemove

f51 7Remove the steering handle screw and nutLift the handle from the steering bracketPull the throttle cable and stop button wires from the grommet in the lower engine coverDisassembly

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285