1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 113Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 113

Ohmmeter TestStop Button
All runnmg
tests must be performed with the engine not

f51 1Separate the 1-pin connector between the stop button and the power pack2Calibrate ohmmeter on appropriate scale Connect the meter red lead to the terminal in stop button end of the connector and the meter black lead to clean engine ground Button depressed, meter must show low reading Button not depressed, meter must show high reading3If engine fails to shut off, test for open blackyellow lead from power pack or open black lead from stop button4Complete all circuits disconnected during this testDR4097

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285