1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 111Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 111

STEPSTOP CIRCUIT TEST
Elimination Test1Disconnect 1-pin Amphenol connector between power pack and key switch
To avoid possible shock hazard, do not handle ignition coils or spark tester during cranking tests
2Crank engine and observe results at spark tester If spark now jumps alternately at each gap, the problem is in the stop circuitGo to Ohmmeter TestKey Switch If some spark is present, go to STEPSENSOR COIL TEST If no spark is present, go to STEPCHARGE COIL TEST3Complete all circuits disconnected during this testIi

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285