1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 72Get this manual

1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285, Page 72

Inspection
1sl 1To test the solenoid windings, calibrate an ohmmeter on low t=J ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe With lever in run positionno fluid should enter inlet fitting With lever in prime positionfluid should come out both outlet fittings'sl 3To inspect or replace internal components, remove the four solenoid cover screws

Back to 1993 Johnson Evinrude "ET" 90 degrees CV Service Manual, P/N 508285