1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 331Get this manual
i leverInstall the flat washer and locking nut supplied
4Install shift cable casing guide on shoulder bolt of shift
with engineDo not substitute locknutTighten locknut securely5Adjust the length of the shift cable by turning the knurled adjusting nut on the shift cable until the cable trunnion fits into the trunnion anchor pocket in trunnion anchor block
i and locknutTighten screw securelyThrottle Cable20 thru 30
'" 6Secure shift cable in anchor bracket by installing screw
[!] 1Install the trunnion tension retainer onto the cable bracket
02Place throttle cable trunnion into bracketr;;l3Attach spring clip guide by sliding onto side of guide and turning until holes in spring clip snap over both pins on guidef614casing guide to engine throttle arm and secure with spring clipTrunnion Adjustment20 thru 30