1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 327Get this manual
Q)CD guide
1431 7Push core wire CD (from engine end) through wire clamp Q) until wire is flush, 132 in(0,8 mm), with end of casing
1441 8Turn in set screw on large end of wire clamp until it touches
core wire, then tighten one more full turn to kink and position core wire
1451 9Grease trunnion pocket in housing halfLift throttle cable
and rotate cable forward until trunnion cap can be inserted into trunnion pocket
1461 10Position throttle lever by hand to align rear hex screw