1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 306Get this manual
Rectifier Ohmmeter Tests Disconnect battery cables before proceeding with this check
[!] 1Disconnect all rectifier leads from terminal board
2Calibrate ohmmeter on appropriate scaleConnect one lead to clean engine groundConnect the other lead to the rectifier yellowgray lead Note the reading Reverse the ohmmeter connections or press the "reverse polarity" button and note the reading high reading in one direction and low reading in the other direction indicates the diode is OK Two high readings or two low readings indicates the diode is damaged
[!] 3Repeat Step using the rectifier yellow lead Results should be similar