1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 301Get this manual
Assembly 1Lubricate the armature shaft bearing surface with one drop of SAE No10 oilLubricate the armature shaft on and above the pinion helix with OMC Starter Bendix Lube, PIN 337016 1sl 2If removed, install retaining ring and washer on drive end
of armature shaft
101 3Assemble drive end cappinionspringand spacer i!J to drive end of armature shaftInstall new locknutUsing a
strap wrench to prevent damage to armature, tighten nut to torque of 240-300 inIbs (20-25 ftIbs (27-34 Nm)4Assemble armature to frame and magnet assembly, aligning marks on drive cap end and frame
l!J end cap with long lead in slotPosition the insulatorsflat
In'] 5Install insulated brush and terminal set in commutator
lock washer Q), and nut as shown in figure