1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 277Get this manual
1141 9Bend the inside loop of the rewind spring in toward the
center of the starter housingEngage the pin of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing
115l 10Lightly apply OMC Triple-Guard grease or Lubriplate 777 to the spindle bushing and pawl pins on the pulleyInstall the bushing and the shim into the starter pulleyNext install the friction platelinks, and pawlsSecure the pawls with the retaining clips115l 11Light apply OMC Triple-Guard grease or Lubriplate 777to the spindleInstall the spindlefriction ringand two spring washers
flat section ofthe friction ring and spindle must be aligned