1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 276Get this manual
Assembly
i manual starters because of rewind spring tension
Wear safety glasses while disassembling and assembling
f711Using OMCStarter Spring Winder and Installer PI 392093, clamp spring winder base in viseInsert adapter release plate CMl into spring winder base
Apply OMC Triple-Guard grease or Lubriplate 777 to the rewind springPlace inner loop of rewind spring in the spring winder baseInsert the pin of the crank and pin assembly into the inner loop of the rewind springSecure the crank and pin assembly to the starter winder base with the crank retainer screwthe toolWind the spring into the starter winder base until end of rewind spring contacts the starter winder base