1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 263Get this manual
Itlll! V2??
Position the small pinion thrust washer with the inside chamfered diameter on the pinion, chamfered side facing pinionOil and install the thrust bearing Install the large thrust washer with chamfered outside edge facing up9Install pinion in gearcase
301 10Grease the end of shift rod and slide it through the shift
rod bushingPlace the cradle on the shifter lever in the propeller shaftWhile holding the detent balls and spring in the hole, slide the clutch dog onto the propeller shaft spl ines with the chamfered and grooved lugs toward the forward gear and aligned as shownNote The grooves on the clutch dog must face the forward gearinstall the forward gear 0), thrust bearing Q), thrust washerand roller bearing on the propeller shaftThe lettering on the roller bearing goes forward