1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 262Get this manual
23 COA3432
COA6226
Assembly
1Coat the shift rod a-ring with OMC Triple-Guard grease and install in shift rod bushing
12312Apply OMC Gasket Sealing Compound to the outside
diameter of the bushingInstall the bushing and washer using OMC Shift Rod Bushing Installer, PIN 304515
12413Oil, then
install new upper driveshaft bearing in the gearcase using OMC Upper Driveshaft Bearing Installer, PIN 326564Press the bearing into the gearcase against the lettered side of the bearing and until the tool is seated on the gearcasegearcase using OMC Upper Driveshaft Seal Installer, PIN 330655, attached to OMC Drive Handle, PIN 378737Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the gearcase and the outer seal with lip facing away from the gearcaseApply OMC Triple-Guard grease to the seal lips after installing