1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 245Get this manual
9Remove the shift yoke with long-nose pliersf131 10 Remove the shifter lever pivot pin Discard the pivot pin O-rmg141 11Remove the propeller shaft and reverse gear components from the gearcasef151 12.Using magnetic tool, locate and remove the two shifter detent balls and one detent spring from the gearcase r:;-;J 13Use long-nose pliers to remove the clutch dog and shifter lever assemblyUse no forceTilting the shifter lever slightly will allow you to remove it from the gearcase1171 14Remove the forward bearing, forward gear, pinion, pinion thrust bearing, and two pinion thrust washers