1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 244Get this manual

1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 244

COB3047
Disassembly

1Remove the six impeller housing screws and washers2Pull up on the driveshaft and remove the driveshaft with the water pump assembly from the gearcaseDisassemble the water pump assembly from the driveshaft
[2] 3Remove the impeller plate and gasketDiscard the gasket[!] 4Remove the two propeller shaft bearing housing screwsInl 5Assemble the following components from OMC Universal
L!J Puller PI N
PIN PIN PI CD PI Q) PI N

378103Remove the propeller shaft bearing housing from the gearcase307636 307637 309489 307639 307638 Body Pressing Screw Screws (-20) Flat Washers Handle

i Pliers PIN 331045The retaining ring is under extreme

Back to 1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282