1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 206Get this manual
11416Install the throttle control plate on outer handle11517Place the throttle end cap into inner handleThe tab on the cap goes into the recess of the inner handlecable
11618Push the throttle cable pin through the end of the throttle 11719Lubricate end ofthe pin, guides, rollers, helix grooves, and
r;1l r:J8l10inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and into the slots of the inner handlePlace the rollers on the ends of the roller pin
Assemble the helix halves on the handle and slide the grip over the helixBe sure the speed indicator is positioned with the speed rangeSnap the grip into placethe minimum slow speed position