1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 205Get this manual
IslBUsing punch and mallet, drive the steel pin that retains the inner handle from the steering handle INotel Do not remove the inner handle except to replace it19l9Remove the plastic inner handle from the metal outer
10Remove the throttle cable seal from the inner handleInspection
handle by driving the outer handle off with mallet and punchInner handle is bonded to the outer handleAfter removing, chip away remnants of inner handle
1Inspect the throttle cable for kinks and wearReplace if necessary2Inspect the steering handle components for wear, cracks, or damageReplace parts if necessary3Refer to Ignition System, Section 3, to test stop switchAssembly 1Install the throttle cable seal in inner handle12