1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 172Get this manual

1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 172

Disassembly To simplify reassembly and wiring installation, layout the various screws and clamps in the order of their proper location
11411To remove the water tube grommet, depress tab of the
grommetPush the grommet out of the inner exhaust hous-

11512Use OMCGrommet Installer, PIN 304148, to installoutside new grommetApply OMC Gasket Sealing Compound to
diameter of the grommetAlign tab of the grommet with hole in the housing and install grommet'16l3Using diagonal or end cutters, gently pry out and remove the flywheel key

Back to 1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282