1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 134Get this manual

1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 134


DR4622 DR4621

Ohmmeter Test Note All ohmmeter tests must be performed with the engine NOT running1Calibrate ohmmeter on appropriate scale2Insert jumper wires in ignition plate connector, terminals "B" and "C"3Calibrate ohmmeter on appropriate scaleConnect between jumpers Meter must show 40 10 ohms
141 4To test .for grounded condition, connect ohmmeter alternately between each jumper and a

Back to 1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282