1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 76Get this manual
17 29281
r:J5l 4Install hose over the large nipple of the primer pump housing and connect other end of hose to the alcohol squeeze bottlePlace your thumb over end of the plunger housingSqueeze the alcohol bottle to fill the plunger housingAlcohol should flow freely out of the small nipple, indicating no obstructionsIf no flow is indicated, replace primer pump housingAssembly 1Position the spring and washer on the plunger shaftf17l 2Install two new a-rings and quad ring onto plunger shaftr,gl 3Install new a-ring onto the end cap and position the end cap on the plunger shaft
Insert plunger shaft and end cap into primer pump housingReinstall retainer clip
120 5To bench test the primer pump after assembly, connect a