1993 Johnson Evinrude "ET" 9.9 thru 30 Service Manual, P/N 508282, Page 13Get this manual
1 Symbols
Throughout this service manual, symbols are used to interpret electrical troubleshooting results or to assign values in drawingsElectrical
[TI This symbol indicates continuity or very low resistance
This symbol indicates no continuity or very high resistance
Use an ohmmeter calibrated on high ohms scale, or continuity light, to test continuityr:;"] When "00" shows on the meter face, no continuity, or very high
resistance, is indicatedThe symbol is referred to as infinity
f41 When "'!" follows value on the meter face, the procedure is