1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 312Get this manual
r:;l 20Using OMC Rod Holder, PIN 983213, clamp rod tightly in viseLubricate end cap and slide it on the rodInstall wear plate on rod end and torque to 84-108 inIbs(9,5-12 Nm)
Assembly f1l 1Lubricate five new pump manifold a-rings and place in cylinder body2Attach pump manifold assembly to cylinder body with three Allen-head screws, and torque to 60-84 inIbs(7-9 Nm)
i the valve all the way into the manifold and torque to
45-55 inIbs(5-6 Nm)Install the retaining ring with the sharp edge of the ring facing out
'" 3Lubricate and install the manual release valveThread