1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 311Get this manual
126116With cylinder body in vise, unscrew trim cylinder end caps using OMC Universal Spanner Wrench, PI 912084,
and breaker barYou will have to use smaller pins in spanner wrench Remove both trim pistons, rods, and end caps
127 117Inspect both bores oftrim cylinders for excessive scoring128 118Remove back-up rings and -ring from each trim piston129119Using OMC Rod Holder, PIN 983213, clamp rod tightly in
a vise Remove wear plate from trim rod and remove end capRemove from viseaUsing screwdriver, carefully pry the scraper out of the end cap and discard