1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 306Get this manual

1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 306

f817Remove the ground wire from the trimtilt unit using No.3 Pozidriv tool IglSSeparate the trimtilt unit wires in the braided tube to permit
removal through the hole in the stern bracket9Remove the external snap rings from the upper pin
[!!] 10Use punch to remove the upper pin11Retract the tilt cylinder rod12Remove the external snap rings from the lower pin

Back to 1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284