1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 305Get this manual
Power TrimTilt Servicing Removal
'111Separate the power trimtilt connector, and remove the rubber grommetf312Remove the terminals from the connector using either flat-blade screwdriver to depress the tab in back of the connector or suitable tool to depress the tab in front of connector3Remove clamp and disconnect 2-pin Amphenol connector4Disconnect two bullet connectors for the tilt limit switch1sl5P.ull wires through the hole in the port side of the lower engme cover6Unscrew the manual release valve, raise the unit, and lock it in place with the tilt support