1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 223Get this manual
1231 17Apply OMC Triple-Guard Grease or Lubriplate 777 to the
handle end of the starter ropeUsing OMC Special Tool
PIN 378774 (Starter Rope Threading Tool), thread the starter rope
through the handlePress the starter rope into the channel of the rope anchor, with end of starter rope butting firmly against end of channelPress the anchor into the handle18Check operation of the starter pawl when the starter rope is pulled outThe starter pawl should extend when the starter rope is pulled and retract when the starter rope recoils1241 19Install the starter lockout assembly
to the starter housing using the shoulder screwTighten the shoulder screw securely
Installation
12511261 1Position the starter assembly onto the motorPlace