1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 222Get this manual
r:;:;J 8Bend the inside loop of the rewind spring in toward the center of the starter housing Engage the slot of the pulley with the inner loop of the rewind spring and install the pulley in the starter housingr:;-;;J 9Place the friction plate spring washer and the plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring
L!!J friction
r:J9l 10Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple-Guard Grease or Lubriplate 777to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulleyr:J9l 11housingthe starter housing spring
in the starter