1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 184Get this manual
2S '" 11Install the starboard locknutReplace locknut if definite resistance is not felt2S '" 12Torque starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut 's to 14 turn29 13Install the tilt cam and collar on the tilt tube30 14Install the steering shaft and thrust washer L!!J Primer and OMC Nut Lock to the splines of the steering shaft
and lower mount bracket
r;:;l 15Install the steering shaft keeperApply OMC Locquic
r:;:;J 16Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to 130-150 ftIbs(176-203 Nm)17Fill the swivel bracket with OMC Triple-Guard grease through the grease fitting on the bracket's port sideLubricate he tilt tube, swivel bracket, and stern brackets through the forward grease fittings18Install the exhaust housing as described in this section