1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 181Get this manual
f81 7Thread the adapter from OMC Steering Tube Service Kit, PIN 434523, onto the port end of the tilt tubeThread OMC Slide Hammer, PIN 432128, into the adapter until at least in (51 mm) of thread are engagedPull the tilt tube from the stern brackets
[!] 8Remove the two tilt tube washers9Remove the anode30761
r:J1l 10Remove the swivel bracketInspect and, if necessary, replace the tilt tube bushingsr:J2l 11Remove the trim sender unit from the port stern bracket and pull its wires through the braided tubei.i3l 1412Remove the trail lock handle, lever, detent, and bushing from the starboard stern bracket