1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 174Get this manual
8Tighten all three screws to following torques: Two side screws15-17 ftIbs(20-23 Nm) Center screw28-33 ftIbs(38-45 Nm)
washersInstall the locknuts on the upper mount screwsReplace the locknuts if definite resistance to tightening is not felt
L!J screws, lower mount to bracketInstall the screws and lock
10Torque the mount fasteners! Torque the upper mount nuts to 30-32 ftIbs(41-43 Nm) Torque the lower mount screws to 24-26 ftIbs(32-35 Nm)
9Apply OMC Locquic Primer and OMC Nut Lock to the four
i under the steering arm, install the two screwsTighten
11While holding the steering handle assembly in place