1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 173Get this manual
'8l3Remove the screws from the inner exhaust housing to the adapterRemove the adapter from the inner exhaust housingRemove the water tube and seal from the inner exhaust housingMark the water tube and inner exhaust housing for correct orientation
E.I megaphone and discard the gasket
19l4Remove the screws from the
megaphoneRemove tha
110 Check baffle and gasket condition, replace if necessary
Assembly
1911Clean the adapter and megaphone gasket surfacesApply
E.I OMC Gasket Sealing Compound to both sides of new
megaphone gasketPlace the gasket and megaphone on the adapterInstall the screws and tighten to torque of 60-84 inIbs(7-9 Nm)'8l2Slide the seal onto the water tube and install in the inner exhaust housingPlace the inner exhaust housing on the adapterObserve orientation mark for correct alignment and position the water tube to align it with the water pumpInstall the screws and tighten to torque of 60-84 inIbs(7-9 Nm)