1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 172Get this manual
Exhaust Housing Servicing Removal 1Remove the powerhead as described in Section 4
LJ brackets to exhaust housing adapterNote the location of the
2Remove the gearcase as described in Section 63Remove the two screwslower engine cover support
washer for correct reassemblyRemove the lower engine cover4Remove steering arm shield1':;-] 5If equipped, remove the two nuts and screws, steering bracket to steering armRemove the steering bracket assembly
i exerts considerable upward pressureRemoving the exhaust housing while it's in the down position could allow sudden release of parts which could cause serious injuryPlace motor in tilt position to relieve pressure6Remove the four screwsmount bracket to lower mountsr:tl 7While holding the exhaust housing, remove the three upper mount to adapter screws Remove the exhaust housing Disassembly '5l 1Remove the lower mount cover screwsRemove the lower mounts