1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 153Get this manual
11If removed, install new lower main bearingWhen pressing on the bearing, support the crankshaft between the two lower counterweights, and press against the lettered side of the bearingr,Ql12Install the main bearing retaining ring with its square, sharp edge facing away from the bearing1"'11113Oil and install the two main bearing assembliesThe split sleeve retaining rings should face away from the flywheel taperr;:;] 14Apply OMC Gasket Sealing Compound to new upper
crankshaft seal's outside diameterUse OMC Seal Installer, PIN 326567, to install the sealSeal lip must face bearing15Lightly coat new upper main bearing O-ring with OMC Triple-Guard grease1,3l16main bearing assembly and O-ringSeal must face