1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 147Get this manual

1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 147

COB13ll

17Carefully lift straight up and remove the crankshaft'16l18Slide the upper main bearing assembly off the crankshaftDiscard the O-ringRemove the upper crankshaft seal as necessaryr:;:;] 19Carefully remove the retaining rings and remove the center main bearings and split sleevesIdentify the components and keep them separate18

20Remove and discard driveshaft O-ring:

1921If the lower main bearing is to be replaced, remove its
retaining ring with OMC Retaining Ring Pliers, PIN 303858Use bearing separator to press the bearing offDiscard the bearing

Back to 1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284