1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 142Get this manual
Powerhead ServicingAll Models Removal
ill twist and remove all spark plug leadsOn electric start
models, disconnect the battery cables at the battery1Rope Start models Section 7remove the starter assemblyRefer to
"" To avoid accidental starting of the engine while servicing,
IT] 2Remove three screws and remove the starter ratchet3Remove the starter lockout cable clamp and disconnect the cable from the shift lever4Tiller modelsremove the throttle cable pivot and the cable bracket 5Disconnect the shift lever 6Remove the stop switch ground lead and remove the stop switch lead from cavity liE" of the stator 5-pin Amphenol connectorUse OMC Pin Remover, PIN 322698, and isopropyl alcohol