1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 112Get this manual
Timer Base Servicing Removal
i and remove all spark plug leads
"'" To avoid accidental starting of engine while servicing, twist
1Remove the stator assemblyRefer to Stator Servicing2Disconnect the timer base connectorrJl 3Remove the screws securing the timer base retaining clips Remove the timer baseInstallation 1Carefully inspect the crankcase head and timer base bushing for dirt, metal chips, or scratches2Apply light coating of OMC Moly Lube to the crankcase head bearing surface and the timer base bushingf51 3Lubricate the retainer ring groove with Evinrude or Johnson Outboard Lubricant4Lightly compress the retainer ring and install the timer baseRoute and connect the timer base leadsrJl 5Install the retaining clips and screwsTighten the screws to torque of 25-35 inIbs(3-4 Nm)6Install the stator assemblyRefer to Stator ServicingDR2618