1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 106Get this manual
Terminal Installation
1Connect the plug and receptacle before installing the terminalApply isopropyl alcohol to the plug and receptacleAlign arrows and carefully insert the plug into the receptacle2Apply isopropyl alcohol to the terminal cavitynalsTo avoid injury, securely hold insert tool against shoulder of terminal while inserting terminals1sl3terminalthe insert tool against the shoulder
1, Use only OMC Insert Tool, PIN 322697, to install termi-
f714Rest the connector against solid surfaceWith the insert tool firmly against its shoulderinsert the leading tip of the terminal into its cavityPush the terminal until step CD of the insert tool reaches the connector body, seating the terminalf8l5Check your workSeparate the connector and look at the terminal you just insertedIf it is properly seated, apply isopropyl alcohol to both connector halves and reconnect themIf the terminal did not seat, remove it and repeat the procedure