1993 Johnson Evinrude "ET" 60 thru 70 Service Manual, P/N 508284, Page 71Get this manual
Disassembly All screws addressed in this procedure are No15 Torx i when removing screws and releasing that pressure
The air motor cover is under spring pressureUse caution
r:;l With No15 Torx screwdriver, remove the Torx screws air motor coverTo control the spring pressure, place pump on your bench with the air motor cover facing upwardHold down on cover while removing screws
L!J holding the
Set cover, screws, O-ring, and two springs asideRemove the Torx screws attaching the inlet housing to the intermediate housing and separate these partsAs you lift the inlet housing, the oil piston will be drawn out of the oil pumpintermediate housing and air motor piston in one hand, and use the other to unscrew the fuel pistonpull gently with counterclockwise motion