1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 311Get this manual
Using OMCRod Holder, PIN 983213, clamp rod tightly in viseLubricate end cap and slide it on the rodInstall wear plate on rod end and torque to 84-108 inIbs(9,5-12 Nm)Assembly
rv 1Lubricate five new pump manifold O-rings and place in body2Attach pump manifold assembly to cylinder body with three screws, and torque to 60-84 inIbs(7-9 Nm)
"" 3Lubricate and install the manual release valveThread the valve all the way into the manifold and torque to 45-55 inIbs(5-6 Nm)Install the retaining ring with the sharp