1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 310Get this manual
126 116With cylinder body in vise, unscrew trim cylinder end caps using OMC Universal Spanner Wrench, PI 912084,
and breaker barYou will have to use smaller pins in spanner wrenchRemove both trim pistons, rods, and end caps
1271 17Inspect both bores oftrim cylinders for excessive scoring1281 18Remove back-up rings and -ring from each trim piston1291 19Using OMCRod Holder, PIN 983213, clamp rod tightly in
a viseRemove wear plate from trim rod and remove end capRemove from viseaUsing screwdriver, carefully pry the scraper out of the end cap and discard