1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 297Get this manual
Relay Ohmmeter Tests bracket will vary from model to model, but the relay terminals are always connected to the electrical system and trim motor as followsS
= Switch (+ or -) Wire ColorBluelWhite, GreenIWhite, or Black
r:jl The orientation and location of the UP and DOWN relays in the
B+12 Volt (+) Battery Wire ColorRed B-12 Volt (-) Battery (Ground) Wire ColorBlack M
Wire ColorBlue or Green To protect your test light or ohmmeter, remove relays from sockets before proceeding with test1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect meter leads to relay terminals "B-" and "M" The meter must show continuityDR3950