1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 266Get this manual
f13l '" 10Lift shift and throttle plate from housingUse caution when removing shift and throttle plate as detent spring is highly compressedIt might fly out, causing personal injuryWear safety glassesf13l 11 Remove detent roller CD,
detent shoeand detent
] 12Lift shift lever assembly from control1141 13To remove throttle lever assemblyremove flat-head screw and countersunk washer from controlDiscard the patch screwLift throttle lever assembly and throttle lever spacer from control
r:p;1 r:p;1 14
Remove screw and locknut retaining the shift lockout cam to the fast idle leverDiscard the locknutRemove keeper plate screw Lift shift lockout cam and shift lockout lever (!) from housingRemove spring washer and fast idle lever from housing
15The key switch, warning horn, neutral start switch, and emergency stop switch are serviceable, if necessaryReplace defective componentsG7l 16To disassemble control handle, remove two screws securing the plate to the control handle Lift neutral lock slide and slide return spring from control handleRemove screw retaining control handle knob and four screws retaining control handle cover Remove control handle knob and control handle cover from control handleTo remove trimtilt switch assembly, remove screw retaining switch to cover