1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 265Get this manual
Prewired Surface ount Remote Cont rol Servicing Disassembly
sources (sparks) or from contact with moving parts if accidental cranking or starting occurs1sl 2Remove control handleloosen hex head screw complete turns
ill systemsFailure to do so could result in injury from ignition
1Disconnect battery cables before servicing electrical
19l 3Support control on blocks to allow the control handle to be
driven off the controlPlace center punch in head of hex head screw, and tap with plastic hammer to disengage the control handle splines from the hub splinesRemove the hex head screw and the control handle